Ask the Community
Groups
How to use SNMP v3 in the MIB Browser? - Connect IT Community | Kaseya
<main> <article class="userContent"> <p><strong>QUESTION:</strong></p> <p>How to use SNMP v3 in the MIB Browser?</p> <p> </p> <p><strong>RESOLUTION:</strong></p> <p>You cannot use the MIB Browser to perform a walk or get on a device configured for SNMP v3. </p> <p>The SNMP v3 credentials are not being entered in the SNMP Community text field correctly.</p> <p>To be able to use SNMP v3 in the MIB Browser:</p> <ul><li>Make sure <strong>3</strong> is selected in the drop down menu for Snmp version.</li> <li>Enter the SNMP v3 credentials in the Snmp Community text field in the following format: user:password:key</li> </ul><p>Keep in mind that this format must be kept. Meaning that if the credentials do not have an authentication key, then the format is: user:password:. Also, if you only have a username configured for the credentials on the SNMP v3 device, then the format is: user::. Therefore, even if you are missing parts of the authentication string, the colons still have to be explicitly typed.</p> <p> </p> <p><strong>APPLIES TO:</strong></p> <p>All versions of Traverse</p> </article> </main>