Ask the Community
Groups
Maximum size is reported incorrectly for SNMP monitoring (Test Rediscovery) - Connect IT Community | Kaseya
<main> <article class="userContent"> <p><strong>PROBLEM:</strong></p> <p>Maximum size is reported incorrectly for SNMP monitoring.</p> <p>When tests for disk monitoring are added to Traverse they initially report the correct disk size. If the disk size is changed (for example if the disk is expanded to a larger size) then Traverse does not automatically detect the new disk size.</p> <p> </p> <p><strong>SOLUTION:</strong></p> <p><strong>Option 1: Manual Test Discovery:</strong></p> <p>For a device which is reporting incorrect maximum values</p> <p>Select Administration → Devices → Tests → Create New Standard Tests</p> <p>Select the relevant monitor type (eg snmp, wmi)</p> <p>Tests with a new maximum, such as increased disk space, memory, etc. are shown highlighted, with updated information</p> <p>You can now choose to update these tests and after two polling cycles the tests will show updated results.</p> <p> </p> <p><strong>Option 2: Automatic Test Rediscovery:</strong></p> <p>Firstly enable Automatic Test Rediscovery (as a Represented Department user)</p> <p>Select Administration → Other → Test Parameter Rediscovery</p> <p>To avoid new tests being discovered and only updates to existing test parameters, the test rediscovery parameters should be configured as follows;</p> <p> </p> <p>Action For New Tests: - Log Only</p> <p>Action For Updated Tests: - Update & Log</p> <p>Action For Deleted Tests: - Log Only</p> <p> </p> <p><strong>Now you can Enable Test Parameter Rediscovery on a per device basis</strong></p> <p>Select Administration → Devices → Update link for a device</p> <p>Select Enable Test Parameter Rediscovery → Submit</p> <p> </p> <p><strong>Enable Test Parameter Rediscovery on a per device basis (Traverse 9.4 and higher)</strong></p> <p>Administration → Devices → Select the row of the device</p> <p><img src="https://us.v-cdn.net/6032361/uploads/migrated/6XAF94R6Y1LQ/test-rediscovery-highlight-device-row.png" alt="Test_Rediscovery_-_Highlight_Device_Row.png" class="embedImage-img importedEmbed-img"></img></p> <p>Select Advanced, scroll down to the bottom and select the 'Enable Test Parameter Rediscovery' checkbox. Confirm the correct settings are selected and choose apply to start the test rediscovery.</p> <p><img src="https://us.v-cdn.net/6032361/uploads/migrated/J65JVZFQVUZX/test-rediscovery-advanced.png" alt="Test_Rediscovery_-_Advanced.png" class="embedImage-img importedEmbed-img"></img></p> </article> </main>