Ask the Community
Groups
Tip: Discovering SNMP tests on devices that expose a large number of tests - Connect IT Community | Kaseya
<main> <article class="userContent"> <p><strong>PROBLEM:</strong></p> <p>Unable to discover all SNMP tests or none at all even though the device is exposing SNMP information.</p> <p> </p> <p><strong>CAUSE:</strong></p> <p>Occasionally, when discovering tests on a device where a large number of tests are found, the web interface will time out and fail to configure tests.</p> <p> </p> <p><strong> WORKAROUND:</strong></p> <p>The workaround is to discover such a device using network discovery.</p> <p>* Delete the device if it already exists (this deletes all tests and history)<br>* Navigate to Administration --> Discovery --> <a rel="nofollow" href="/home/leaving?allowTrusted=1&target=http%3A%2F%2F10.10.14.246%2Fcommon%2FtopologyDiscovery.jsp">New Network Discovery Session</a> <br> For the Network scope, specify the device ip and a mask of 255.255.255.255, for e.g., 10.10.12.122/255.255.255<br> Set the discovery location as appropriate<br> Fill out he rest of the form and start the discovery<br> Once the device is presented, proceed with the workflow and discover tests on the device</p> <p>The timeout will generally be handled here and the requisite tests discovered.</p> <p> </p> <p><strong>APPLIES TO:</strong></p> <p>All versions of Traverse </p> <p> </p> <p><strong>REFERENCE:</strong></p> <p><a rel="nofollow" href="https://kaseya.vanillacommunities.com/kb/articles/aliases/kaseya/hc/en-gb/articles/229042728-Not-all-tests-being-discovered-due-to-timeout-e-g-Cisco-Nexus-">https://helpdesk.kaseya.com/hc/en-gb/articles/229042728-Not-all-tests-being-discovered-due-to-timeout-e-g-Cisco-Nexus-</a></p> <p><a rel="nofollow" href="https://kaseya.vanillacommunities.com/kb/articles/aliases/kaseya/hc/en-gb/articles/229046168-Network-Discovery-excludes-some-tests">https://helpdesk.kaseya.com/hc/en-gb/articles/229046168-Network-Discovery-excludes-some-tests</a></p> <p> </p> </article> </main>