Ask the Community
Groups
Get Networking information to update in the Integrated Bare Metal Recovery GUI - Connect IT Community | Kaseya
<main> <article class="userContent"> <h2 data-id="summary"><strong>SUMMARY</strong></h2> <p>Get Networking information to update in the Integrated Bare Metal Recovery GUI</p> <h2 data-id="issue"><strong>ISSUE</strong></h2> <p></p> <h3 data-id="purpose">Purpose</h3> <p>Explain how to get the network settings to update from the Integrated Bare Metal Recovery GUI</p> <h3 data-id="description">Description</h3> <p>The Integrated Bare Metal Recovery GUI reads network adapter information at startup, and subsequently when a network change is made through the GUI. When a change occurs outside of the GUI, however, the values displayed in the GUI are not updated.</p> <h3 data-id="cause">Cause</h3> <p>There is no automatic updating of network information in the GUI</p> <h3 data-id="resolution">Resolution</h3> <p>If initially there are no network adapters shown in the list because a network driver needs to be loaded, after loading the driver, you can click on the dropdown list and select the only entry that reads, “No Network Adapters. Select to re-scan”. Note that you actually have to select tis from the drop down list. Simply clicking on the list, but not selecting it will not work. This operation should cause a re-scan for networking information and the list should be updated.</p> <p>If initially there is a network adapter shown, but it does not have a DHCP address because the network cable is unplugged, or for some other reason, you must stop and re-start the GUI. To do this, simply click on Exit, then from the command line, type in Restore to restart the GUI. After a restart, the GUI should show the correct networking information.</p> </article> </main>