Ask the Community
Groups
How to execute an image-based bare metal restore to a different client - Connect IT Community | Kaseya
<main> <article class="userContent"> <h2 data-id="summary"><strong>SUMMARY</strong></h2> <p>This article explains how to make the necessary changes to run an image-based bare metal restore to a different IP address.</p> <h2 data-id="issue"><strong>ISSUE</strong></h2> <p></p> <h4 data-id="this-article-applies-to-the-following">This article applies to the following:</h4> <ul><li>This article applies only to image-based bare metal recovery. To use a different IP address when executing an integrated bare metal recovery (release 7.4 or higher), you can simply assign the destination machine a different IP address when setting up the local environment for the recovery. For details, see <a rel="nofollow" href="/home/leaving?allowTrusted=1&target=http%3A%2F%2Fwww.unitrends.com%2Fdocuments%2Flegacy-rs-ueb-admin-guide%2Fdefault.htm%23cshid%3D1910">Windows integrated bare metal recovery</a> in the Unitrends Administrator's Guide.</li> <li>Unitrends backup appliance software version 6.2 and later</li> </ul><h4 data-id="to-execute-an-image-based-bare-metal-restore-using-a-different-ip-address">To execute an image-based bare metal restore using a different IP address:</h4> <ol><li>Change the IP address of the client on the Unitrends appliance to the new address</li> <li>Change the IP address on the bare metal cd (please also uncheck the default (old ip address)). The address has to be correct on both sides in order to communicate properly.</li> </ol> </article> </main>